Micro 4000 Local Monitor
The Micro 4000 monitor is ideal for those who need
a medium sized non-PC based monitoring system that is fully validatable.
The Micro 4000 comes with a lithium cell battery backed-up memory which
prevents the loss of any user program and sensor probe calibrations in
the event of a long term power failure, or if the unit is turned off.
Internal printer and telephone
dial-out alarm
notification are standard. Single board design offers high reliability
and easy serviceability.
The internal printer records readings from all
monitored equipment, eliminating the need for chart recorders. The
printout rate is set by the user to print out anywhere from 0 to 255
times per day.
The voice telephone calls a user-programmed list
of up to 10 people, in priority order. It calls until it gets a
response. If the problem isn’t corrected in a user-set period of time,
the alarm starts telephoning again.
You can dial into the system at any time for alarm
status reports and responses.
|
|
The Micro 4000 can monitor a variety of
parameters and each probe is individually programmed.
|
|
|
The node’s LCD front panel continuously
displays probe readings, out-of-range conditions, alarms, deactivated
alarm points, power, and battery status.
|
|
|
You can interrogate any specific probe at any
time by entering the probe’s number on the node’s panel.
|
|
|
Each probe is individually programmed for
its:
|
|
|
High and low limits. |
|
|
Alarm relay activation. |
|
|
Alarm delay times, to prevent false alarms. |
|
|
Alarm reactivation times, so a problem can’t
be forgotten. |
|
|
Program setup can be done remotely, via a
touch-tone phone, or at the keypad.
|
|
|
Pass codes prevent unauthorized program
changes.
|
|
|
System-wide self-monitoring generates trouble
alarms and a diagnostic message. |
Click here if you would like to
download a copy of the product brochure.
