Other Products

 

Micro 4000 Local Monitor

     

The Micro 4000 monitor is ideal for those who need a medium sized non-PC based monitoring system that is fully validatable. The Micro 4000 comes with a lithium cell battery backed-up memory which prevents the loss of any user program and sensor probe calibrations in the event of a long term power failure, or if the unit is turned off.

Internal printer and telephone dialout alarm notification are standard. Single board design offers high reliability and easy serviceability.

The internal printer records readings from all monitored equipment, eliminating the need for chart recorders. The printout rate is set by the user to print out anywhere from 0 to 255 times per day.

The voice telephone calls a user-programmed list of up to 10 people, in priority order. It calls until it gets a response. If the problem isn’t corrected in a user-set period of time, the alarm starts telephoning again.

You can dial into the system at any time for alarm status reports and responses.

	The Micro 4000 can monitor a variety of parameters and each probe is individually programmed.
	The node’s LCD front panel continuously displays probe readings, out-of-range conditions, alarms, deactivated alarm points, power, and battery status.
	You can interrogate any specific probe at any time by entering the probe’s number on the node’s panel.
	Each probe is individually programmed for its:
		High and low limits.
		Alarm relay activation.
		Alarm delay times, to prevent false alarms.
		Alarm reactivation times, so a problem can’t be forgotten.
	Program setup can be done remotely, via a touch-tone phone, or at the keypad.
	Passcodes prevent unauthorized program changes.
	System-wide self-monitoring generates trouble alarms and a diagnostic message.

 

Click here if you would like to download a copy of the
product brochure.